Service convergence - TW56X81

Discussion in 'Archived Threads 2001-2004' started by Jim Kosinsky, Jan 27, 2003.

  1. Jim Kosinsky

    Jim Kosinsky Auditioning

    Joined:
    Aug 4, 1999
    Messages:
    2
    Likes Received:
    0
    Quick question...when performing a service convergence on my TW56X81, do I need to follow an order of screen modes (Standard, Full, TW1, 2, 3), or can I just enter service mode in any of the modes and adjust convergence without affecting the others?

    My FULL mode and HD input have a few small areas where I'd like to adjust the blue convergence, but the other modes are fine. Thnx for any feedback!
     
  2. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings

    Any mode will do. No order to doing it.

    Now if you want to change parameters like hit or wid or etc ... then a proper order must be adhered to.

    Regards
     
  3. Jim Kosinsky

    Jim Kosinsky Auditioning

    Joined:
    Aug 4, 1999
    Messages:
    2
    Likes Received:
    0
    Thnx! I'm not adjusting anything else..just had it ISF calibrated about 2wks ago, and there are a few little 'nudges' I'd like to make to add to the perfection of the image.
     

Share This Page