SCSI help!

Discussion in 'Archived Threads 2001-2004' started by Jeff Kleist, Mar 19, 2002.

  1. Jeff Kleist

    Jeff Kleist Executive Producer

    Joined:
    Dec 4, 1999
    Messages:
    11,267
    Likes Received:
    0
    I have an Iomega Buz, which has a built in Advantec UltraSCSI adapter. Now my scanner is my only SCSI device and it used to work fine. The card reports back fine on boot, but if I have the scanner plugged in I get "Error 0x15". Windows device manager reports the card having trouble even with a driver reinstallation(whether something is plugged in or not). Is the card hosed?

    Yes, I tried another slot, it worked fine the last time I hauled out the scanner 2 years ago.
     
  2. Pete Mazz

    Pete Mazz Supporting Actor

    Joined:
    May 17, 2000
    Messages:
    761
    Likes Received:
    0
    Double check the SCSI termination and also the IDs. Only the last device should be terminated and each must have a unique ID#.

    Pete
     
  3. Jeff Kleist

    Jeff Kleist Executive Producer

    Joined:
    Dec 4, 1999
    Messages:
    11,267
    Likes Received:
    0
    Only 1 device, it's terminated and I tried switching the ID
     

Share This Page