1. Hello all.

    DVD/SACD Player: Sony DVP-NS755V
    Receiver: Yamaha RXV730

    How do I connect these together to listen to SACDs? It will play but I get no sound. Do I have to use the 5-CH Output connectors for SACD?

    Here's how my audio is connected now:
    DVD to Receiver = Optical

    I used the coax for the digital cable, but DVD to Receiver = Coax did not work either.

    I also configured the DVD player to have just about everything turned on.
     
  2. John Garcia

    John Garcia Executive Producer

    Joined:
    Jun 24, 1999
    Messages:
    11,571
    Likes Received:
    24
    Location:
    NorCal
    Real Name:
    John
    You cannot pass SACD or DVD-A via digital connections, only analog (yes, you must use the multi-channel outs). This means you've got to go buy 3 pairs of stereo RCAs, or one and listen in stereo only. You can leave the digital coax for DVDs.
     
  3. Dom P.

    Dom P. Stunt Coordinator

    Joined:
    Jan 23, 2003
    Messages:
    161
    Likes Received:
    0
    ANy stero RCA's will work right??

    I mean you could even use the 2 audio portions of a 3 cable setup for Aud & Vid.
     
  4. Greg_R

    Greg_R Screenwriter

    Joined:
    Apr 9, 2000
    Messages:
    1,996
    Likes Received:
    0
    Location:
    Portland, OR
    Real Name:
    Greg
     
  5. John Garcia

    John Garcia Executive Producer

    Joined:
    Jun 24, 1999
    Messages:
    11,571
    Likes Received:
    24
    Location:
    NorCal
    Real Name:
    John
    In theory, yes any cables will work, but you don't want to go firing up one of the highest resolution audio formats available using $5 cables, now do you?

    You can't come back and say it doesn't sound good if you do...[​IMG]
     

Share This Page