RP91 & Pro Logic (1 Viewer)

[Rick Simpson]

I have a Technics receiver"SA-AX620" that is pro logic.I want to buy a RP91 and hook it up to it.My receiver on the front says "6CH Discrete Input"does this mean I could watch dvd's in DTS and DD even though my receiver is only pro logic?Thanks alot

 

[Scott Merryfield]

Since your receiver has the 6.1 channel discreet inputs, you can connect the RP-91's 5.1 channel outputs to the receiver and use the internal Dolby Digital and DTS decoders built into the RP-91.
------------------
My DVD Collection
AFI 100 Films to watch: 40 -> 5
[Edited last by Scott Merryfield on August 25, 2001 at 08:10 AM]

 

[Miles_W]

Rick,
what Scott said is correct you will need either six rca cables to hook up your RP-91 to the technics. This will allow you to do DD and DTS via the decoders in your RP-91
Miles
the other thing might be a different cable on the back of your technics. Some receivers use a db 25 to save space... then you will need a DB25 to 6 rca cable.
------------------
Miles
************************
DarkSide Member since(93)

 

[Rick Simpson]

The inputs for the dvd are the same as everything else so do i just need standard rca cables?

 

[Miles_W]

Yep,
Should be just one for each channel...
Miles
------------------
Miles
************************
DarkSide Member since(93)