NickSo
Senior HTF Member
- Joined
- Jul 2, 2000
- Messages
- 4,260
- Real Name
- Nick So
I was looking through the Headfi forums looking for a cheap easy decent looking way to hold my headphones.
All the ones i saw were table-based, IE Banana hooks, plastic/glass heads. Problem is, i dont have much room in my room. So i decided to hang it on my wall.
Anyway, i found some scrap wood i found in the garage, some crappy tools, and 1.5 hours, i have finished the construction of my DIY headphone wall-hanger. I just gotta wait for it to dry and set overnight, and then im gonna paint it...
Here's the fully constructed (unpainted, unfinished) pic:
[url=http://img244.echo.cx/img244/2397/dscf00089jk.th.jpg] [/url]
I have little woodworking experience, and the tools i had available are limited, and i used even less: A hacksaw, and a rotary tool. Some wood glue and C-clamps as well. The edges are nowhere near as nice as i'd like em to be, i might try and find some plastic ends to put overtop the end of the dowels.
Here are some finished pics:
[url=http://img253.echo.cx/img253/5127/hphang30sx.th.jpg] [/url][url=http://img54.echo.cx/img54/2497/hphang21xc.th.jpg] [/url][url=http://img54.echo.cx/img54/40/hphang49kl.th.jpg] [/url][url=http://img177.echo.cx/img177/1459/hphang14pt.th.jpg] [/url]
All the ones i saw were table-based, IE Banana hooks, plastic/glass heads. Problem is, i dont have much room in my room. So i decided to hang it on my wall.
Anyway, i found some scrap wood i found in the garage, some crappy tools, and 1.5 hours, i have finished the construction of my DIY headphone wall-hanger. I just gotta wait for it to dry and set overnight, and then im gonna paint it...
Here's the fully constructed (unpainted, unfinished) pic:
[url=http://img244.echo.cx/img244/2397/dscf00089jk.th.jpg] [/url]
I have little woodworking experience, and the tools i had available are limited, and i used even less: A hacksaw, and a rotary tool. Some wood glue and C-clamps as well. The edges are nowhere near as nice as i'd like em to be, i might try and find some plastic ends to put overtop the end of the dowels.
Here are some finished pics:
[url=http://img253.echo.cx/img253/5127/hphang30sx.th.jpg] [/url][url=http://img54.echo.cx/img54/2497/hphang21xc.th.jpg] [/url][url=http://img54.echo.cx/img54/40/hphang49kl.th.jpg] [/url][url=http://img177.echo.cx/img177/1459/hphang14pt.th.jpg] [/url]