PE Amp ?

Discussion in 'Archived Threads 2001-2004' started by David_Merrow, Dec 25, 2002.

  1. David_Merrow

    David_Merrow Stunt Coordinator

    Joined:
    Mar 25, 2001
    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    0
    Hows everybody doing?

    I just got my pe amp for christmas and was wondering how to hook it up. My sub enclosure is already finished and I don't want to cut a hole in it.
    I was planning on building a seperate enclosure for the amp. Is there any way to run speaker wire from the front on the amp to my input terminals on the sub? Or do I have to use the two wires that are on the back of the amp?

    thanks,
    David
     
  2. Kevin_Johnson

    Kevin_Johnson Auditioning

    Joined:
    Dec 19, 2002
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    Go ahead and make the enclosure for the amp. Just add binding posts that connect to the wires from the amp. Run speaker cables to binding posts in your sub enclosure. From there hook them to the amp. Voila!

    Kevin
     
  3. David_Merrow

    David_Merrow Stunt Coordinator

    Joined:
    Mar 25, 2001
    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    0
    I already have banana plug type speaker inputs on the sub enclosure. Would I just cut off the end of the wire on the amp and add banana plugs?
     
  4. Patrick Sun

    Patrick Sun Studio Mogul

    Joined:
    Jun 30, 1999
    Messages:
    38,777
    Likes Received:
    492
    Trophy Points:
    9,110
    I made this amp box and did not cut off the spade connectors, but did connect them to a set of banana plug acceptors.
     
  5. David_Merrow

    David_Merrow Stunt Coordinator

    Joined:
    Mar 25, 2001
    Messages:
    51
    Likes Received:
    0
    Trophy Points:
    0
    Patrick, that is a great idea. I am glad that you posted that before I cut any wires.
    thank you very much for showing it
    david
     

Share This Page