Panny 47WX52 blue gun shot its whad

Discussion in 'Displays' started by Mike Nelms, Apr 5, 2005.

  1. Mike Nelms

    Mike Nelms Extra

    Joined:
    Jul 19, 2002
    Messages:
    24
    Likes Received:
    0
    It appears my 3 year (not under any warranty) set has a problem with the blue gun. At first I thought is was the EVIL POP but the blue gun cannot be adjusted. It just send streaks across the screen when I move the knob. Anyone know how difficult it is to fix? I have been told by others that it may be the blue gun convergence board.

    Really at a loss I can probably fix this myself. I think the part I need is:

    TXFCRT14FSER ASSY, CRT (B)

    Although I am not sure. Going to order service manual.

    Any hints, advice, do's, don'ts, appreciated.

    Thanks!

    Mike Nelms
     
  2. Tim Jin

    Tim Jin Supporting Actor

    Joined:
    Jan 12, 2003
    Messages:
    529
    Likes Received:
    0
    If its on the circuit board, how do you know what transistor or part went bad?
     
  3. John S

    John S Producer

    Joined:
    Nov 4, 2003
    Messages:
    5,460
    Likes Received:
    0
    Well if the gun isn't all to much money. You may as well give it a try. Hard to say, electronics could certainly be the culprit still. You will know for sure, if you get a new gun.
     

Share This Page