panasonic pt-ae100e help

Discussion in 'Displays' started by tirpas, Sep 20, 2003.

  1. tirpas

    tirpas Auditioning

    Joined:
    Sep 20, 2003
    Messages:
    1
    Likes Received:
    0
    I have problem with panasonic pj(pt- ae100e),its green and pink colors in the corners,seen only on grey scale.
     
  2. Rik P

    Rik P Stunt Coordinator

    Joined:
    Aug 25, 2001
    Messages:
    111
    Likes Received:
    0
    I've read about this over at the AVS forum there has been some talk about LCD panel discoloration.
    They think this may be due to inadequate vetilation in the projector causing the panels to burn and discolor. Not sure if this is the same problem your having but you can take a look over the AVS forum and see.
     
  3. Chris PC

    Chris PC Producer

    Joined:
    May 12, 2001
    Messages:
    3,975
    Likes Received:
    1
    I have the same problem to a degree. I believe it has to do with the polarizer plate warping. I don't think it is necessarily the LCD panel itself. I noticed it happening in my projector and I have since made some adjustments to higher fan speed while the light remains on low. Make sure you use the medium or high fan speed and allow proper ventalation. To fix the problem, I think it might require replacing the polarizer plates.
     

Share This Page