Panasonic l300u Factory/Service mode?

Discussion in 'Displays' started by Scot Kight, Mar 26, 2003.

  1. Scot Kight

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    If you know how to get into the factory or service modes for this projector, please let me know.

    I am not talking about the "flicker tweak" by holding down the enter key on the OSD setting. I need the real service mode with true access to the units bias and gain settings for ALL colors even when using the component input.

    Scot
     
  2. Anthony F.

    Joined:
    Jun 12, 1999
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    0
    The service menu should be on the same screen as the flicker adjustment--right below it I believe.
     
  3. Scot Kight

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    No, that is not it unfortunately. That is a "service mode" which is just a series of system generated screens. Crosshatches, colors, etc.

    I need the TRUE service/factory mode which gets you into the bias and gains.

    Scot
     
  4. Anthony F.

    Joined:
    Jun 12, 1999
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    0
    Sorry. I'd suggest going to AVS but I see you've been there too.[​IMG]
     
  5. Scot Kight

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    Heh yeah its been tough trying to get information about this projector. For some reason noone seems to have the service mode information, or the service manuals.
     

Share This Page