odd room angles

Discussion in 'Home Theater Projects' started by RoyPin, Mar 9, 2004.

  1. RoyPin

    RoyPin Auditioning

    Joined:
    Feb 26, 2004
    Messages:
    1
    Likes Received:
    0
    I had to compromise with my wife in the basement to get my planned HT which will result in a 45 degree clipped corner on the screen side. My question is should I mirror the 45 degree angle on the other side or just ignore it? The corner will result in a wall being about 3 1/2' long. The room itself can be a maximum 14 x 19 with 7'10" ceiling due to a steel beam and ductwork running lengthwise through the room. Any thoughts or suggestions will be appreciated.
     
  2. Joe Thompson

    Joe Thompson Stunt Coordinator

    Joined:
    Dec 16, 2002
    Messages:
    128
    Likes Received:
    0
    I too would like to know this as I have the same thing going on in the rear of my proposed room.

    thanks....
    Joe
     
  3. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,100
    Likes Received:
    33
    Location:
    Katy, TX
    Real Name:
    Wayne
    By “clipped,” do you mean a build-out across the corner so that it is no longer 90 degrees?

    If so, it wouldn’t hurt to do the same thing to them all, except the one where the sub will be. It’s an old recording studio trick to build-out across any corners that are 90 degrees are less.

    Regards,
    Wayne A. Pflughaupt
     

Share This Page