Need help hookin up my E90s to my HK-3480...

Discussion in 'Speakers' started by AndrewGA, Feb 11, 2006.

  1. AndrewGA

    AndrewGA Auditioning

    Joined:
    Feb 2, 2006
    Messages:
    8
    Likes Received:
    0
    Ok guys, I did some researched and bought a pair of E90s and a Harman Kardon HK-3480 to go with it. I have them playing but one of the speakers isn't able to play the high frequencies for some reason, meaning its hooked up wrong.

    Can someone please tell me the correct wiring for this pair? The picture below is how they are hooked up now and they don't sound right. Please help!
     
  2. ColinM

    ColinM Cinematographer

    Joined:
    Dec 9, 2001
    Messages:
    2,050
    Likes Received:
    0
    Keep it simple - One red/black connection from the amp to one red/black on the speaker. Leave all jumpers in place for now.

    ( I don't see a pic )
     
  3. MikeNg

    MikeNg Second Unit

    Joined:
    Jan 22, 2004
    Messages:
    440
    Likes Received:
    0
    Are you sure it's the wiring and not a blown tweeter? What happens if you swap left with right? Does the problem move with the wire? Are you using any DSP (digital signal processing)? Any improvement if you run it straight stereo?
     

Share This Page