1. Sign-up to become a member, and most of the ads you see will disappear. It only takes 30 seconds to sign up, so join the discussion today!
    Dismiss Notice

Need assistance with receiver/vcr output.

Discussion in 'Archived Threads 2001-2004' started by Alex_S, Apr 13, 2002.

  1. Alex_S

    Alex_S Auditioning

    Joined:
    Mar 10, 2001
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    Hi,

    Thanks in advance for any help.

    I have a kenwood VR 4080 receiver, mitsubishi vcr and satellite feed. Im trying to tape a program that is on satellite. I am able to get a signal to the vcr, but the audio is extremely low... I have to max the volume on the reciever to barely hear the audio.

    Any suggestions on fixing this problem would be greatly appreciated.

    Alex
     
  2. Bill_Weinreich

    Bill_Weinreich Second Unit

    Joined:
    Sep 25, 2000
    Messages:
    317
    Likes Received:
    0
    Trophy Points:
    0
    Alex

    How do you have the sat connected,compostie or s-vid. Is it connected directly to the receiver?

    If you are using S-vid out on the sat then you would have to use s-vid throught the system. i.e you cant input svid on the receiver and use composite out to the vcr.

    Bill
     
  3. Alex_S

    Alex_S Auditioning

    Joined:
    Mar 10, 2001
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    Thanks, I figured out what the problem was. I had to change the recording mode so that it would convert the digital to analog.

    Alex
     

Share This Page