My D.I.Y Towers (Pic)

Discussion in 'Archived Threads 2001-2004' started by Brett DiMichele, Nov 23, 2001.

  1. Brett DiMichele

    Brett DiMichele Producer

    Joined:
    Sep 30, 2001
    Messages:
    3,181
    Likes Received:
    0
    Trophy Points:
    0
    Ok Ok, these are 3D modeled but I guess they could still
    be considered as D.I.Y since I did make them [​IMG] And here
    are some 3D modeled renders of my next set of Bi-Wires that
    I will be making in a month or so.
    Let me know what you think..
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Sean Conklin

    Sean Conklin Screenwriter

    Joined:
    Oct 30, 2000
    Messages:
    1,720
    Likes Received:
    0
    Trophy Points:
    0
    Looks good Brett!
     
  3. Patrick Sun

    Patrick Sun Studio Mogul

    Joined:
    Jun 30, 1999
    Messages:
    38,777
    Likes Received:
    492
    Trophy Points:
    9,110
    Where's the tweeter?
     
  4. Brett DiMichele

    Brett DiMichele Producer

    Joined:
    Sep 30, 2001
    Messages:
    3,181
    Likes Received:
    0
    Trophy Points:
    0
    Pat,
    I haven't gotten that far yet [​IMG] It takes time to model
    this stuff [​IMG] What I am going to do is add a tweeter
    D'Apolitto style and then copy the whole driver section
    to the back of the cabinent (Similar to BP2000's) and then
    I am even going to model an amp,crossover and wires..
    This is so much fun [​IMG]
     
  5. Brett DiMichele

    Brett DiMichele Producer

    Joined:
    Sep 30, 2001
    Messages:
    3,181
    Likes Received:
    0
    Trophy Points:
    0
    Pat,
    Does this look better? I even made a crossover and added
    the binding post box. Now I need to make an internal amp
    and then I need to "copy" the whole assemby and position
    it 180 degrees opposite and do a re-render that way you
    can see both sides at once.
    [​IMG]
     
  6. Patrick Sun

    Patrick Sun Studio Mogul

    Joined:
    Jun 30, 1999
    Messages:
    38,777
    Likes Received:
    492
    Trophy Points:
    9,110
    So what's with the MTM on the backside?
     
  7. Brett DiMichele

    Brett DiMichele Producer

    Joined:
    Sep 30, 2001
    Messages:
    3,181
    Likes Received:
    0
    Trophy Points:
    0
    Full Dipole Mains [​IMG]
     
  8. Brian Bunge

    Brian Bunge Producer

    Joined:
    Sep 11, 2000
    Messages:
    3,716
    Likes Received:
    0
    Trophy Points:
    0
    Sort of a la Defective Technology? Oops...I guess that's Definitive Technology![​IMG]
    They do look great! All you need to do now is actually build them!
    Brian
     
  9. Patrick Sun

    Patrick Sun Studio Mogul

    Joined:
    Jun 30, 1999
    Messages:
    38,777
    Likes Received:
    492
    Trophy Points:
    9,110
    I don't understand dipole mains. I envision mushy sound.
     
  10. Brett DiMichele

    Brett DiMichele Producer

    Joined:
    Sep 30, 2001
    Messages:
    3,181
    Likes Received:
    0
    Trophy Points:
    0
    Pat,
    All I can say is ask some Definitive Technology BP2000
    owners if they sound mushy. You have to give them lots
    of room to breathe from what I understand. But when you
    can and do they sound super (so the owners say).
    This is nothing more than an exercise in design and having
    a little fun. I have no plans on building anything [​IMG]
    I enjoy the design area more than the actual construction.
    perhaps if I had a workshop that would be diffrent [​IMG]
    I am, however making the cables that I showed above.. Cables
    don't require me to have thousands of dollars worth of wood
    working equipment.
     
  11. Scott Simonian

    Scott Simonian Screenwriter

    Joined:
    Jun 20, 2001
    Messages:
    1,281
    Likes Received:
    0
    Trophy Points:
    0
     
  12. Patrick Sun

    Patrick Sun Studio Mogul

    Joined:
    Jun 30, 1999
    Messages:
    38,777
    Likes Received:
    492
    Trophy Points:
    9,110
    Then they are definitely not my cup of tea.
     

Share This Page