Mits 46809 --Left side of screen cut off/right side is fine....?? huh?

Discussion in 'Archived Threads 2001-2004' started by Jeff Rogers, Aug 1, 2002.

  1. Jeff Rogers

    Jeff Rogers Second Unit

    Joined:
    Aug 24, 2000
    Messages:
    309
    Likes Received:
    0
    Any ideas? It seems like the right side near the edge is perfect.. but anytime there is credits or an image on the left side it is cut off?
    Is it possible for the left side to be stretched too much?
    Any way to bring that back in? Would convergence be of any help. It's just more or less off center...[​IMG] [​IMG]
     
  2. Andy_S

    Andy_S Second Unit

    Joined:
    Jul 19, 2000
    Messages:
    393
    Likes Received:
    0
    The best place to look for a fix is here:
    http://www.hometheaterspot.com
    The forums there are great.
    This one specifically may have the answer you need:
    http://www.hometheaterspot.com/htsth...t=&Board=UBB47
    Check the very first post (begins with AA). I believe it has ways to adjust your geometry or to center the screen. If you don't find exactly what you need, go directly to the Mitsubishi section and ask the folks in there.
     
  3. Jeff Rogers

    Jeff Rogers Second Unit

    Joined:
    Aug 24, 2000
    Messages:
    309
    Likes Received:
    0
    I have purused the area...and while there is a good deal of info.. I really don't know what the problem is called..so I don't know the answer when I see it. :b
     

Share This Page