Lets start a Gallery of "your" favorite DIY images (1 Viewer)

[Anthony_Gomez]

The DIY forum seems dead, so I thought I'd start a new ...thread


The "rules":
1) The picture MUST be a DIY project
2) This is not a thread on what "kit" or "plan" has the best potential or sounds the best, but rather images of the best visial exicution of a DIY project. Hopefully we can get some really cool pics here.
3) ANY audio/video related DIY project is fair game (ie cables, amps, speakers, equipment racks)
4) LINK ALL IMAGES!!! This way each time you visit this thread, you don't waste the host bandwidth by keep loading the same pictures over and over.

EDIT:
5) YOUR favorite, doesn't necessarily mean one of your projects...but then again,one of your projects might be your favorite anyways



...I'll start. This is a Dipole done by Steve Houlihan. He had them at the las Bass List meeting.
http://sho.mystarband.net/BBGraphics/Dipole3e.jpg

actual design info:
Link Removed

 

[Bob Bartlett]

Here's mine. These are RC2 diy speakers from selahaudio and a 150 litre sealed tempest that is hidden behind the couch.


http://briefcase.yahoo.com/bc/rykerjenbob/

 

[Henry_W]

Ok then - here is fun with Grilles!! My 2 Pi art Deco just finished.

http://home.earthlink.net/~hwatkins/id62.htm

 

[Anthony_Gomez]

Best looking Arial I have ever seen!
http://indigo.ie/~walton/200x526fin1.jpg

construction info!
http://indigo.ie/~walton/ariel1.html

This beauty was made WITHOUT a router!!!!

 

[Michael Hartwig]

Here's a couple of my projects:
An octagonal Tempest sub and my version of the ARdiys.

My Tempest and ARdiys

 

[GeorgeS]

"my version of the ARdiys."

a clean, modern spin on the early prototype

 

[Mike Keith]

Here is mine, all active fully adjustable mid enclosures with a telescoping tweeter pod.

http://www.geocities.com/kingdaddyke...ype.html?10166

 

[Martice]

These are the most beautiful GR Research AV1's I've ever seen.

Way to go Darren!!



AV1's

 

[AllanRW]

http://quicksitebuilder.cnet.com/wrn...ding/id13.html
Down at the bottom, the MTM using the FAL.
Removable top plate,removable tweeter plates as well.1.25" thick base plates, port panels to adjust the length from 3/4" to 1.25"

These use the FAl drivers and for a trial the G2 as the plates are removable.
Now this is how you use 7 sheets of BH5

Al

 

[Jack Gilvey]

You guys are all quite talented, I aspire to that level of finish! Mike Keith's is incredible from a creative and construction standpoint. This one can't compare, but I did do all the design 'n construction stuff myself:

http://mywebpages.comcast.net/jgilve...PRSub/Sub7.JPG

http://mywebpages.comcast.net/jgilve...b/IMAGE016.jpg

http://mywebpages.comcast.net/jgilve...b/IMAGE017.jpg

 

[DerrickW]

Michael Hartwig- the tempest is very nice, but you made those other speakers too? those are simply amazing.

 

[Michael Hartwig]

Yes the other speaker is my creation also. I'm currently designing a center channel and rear surrounds (that will hang on the wall), with the same look.
thx

 

[Hank Frankenberg]

My crude web site has some of mine, but my most proud accomplishment is the pair of GR Research Alpha LS's I built for Danny personally. I veneered them in Padauk. They're on the second page of my web site. Compared to the other photos, I'm ashamed of the low resolution of mine.
www.geocities.com/hankbond1/index

 

[Brian Bunge]

Hank,

Just cash in some of that 3M stock of yours and spend the whopping $99/yr. for real web space.

 

[Brett DiMichele]

Okay fine you guys are going to make me show you all up
(insert major sarcasm here..)

Here is an image of my car sub box I built 10 years ago
and almost 10 cars ago Still alive and well..

I don't have anything else to show off yet.. When my high
end klone audio rack is done I will be sure to flaunt it
all over.. As for speakers I am not into just building
something new every week like some of you guys! So when
I build my set it will be the only set I build and hopefuly
they will last me a couple decades

Here's my car sub box.. Isn't it snazzy?

http://www.westol.com/~brettd/stratus/system1.jpg

 

[Neil Joseph]

MY DIY screen

http://webhome.idirect.com/~orange1/...all_screen.jpg

 

[Dean Cooper]

Here are a couple of a Leach Amp that a guy built. I found them completely inspiring and wound up building a few myself because of these pictures. I highly recommend trying one of these, they sound fantastic.



A look at the guts.

A fine view of the front.

Dean

 

[Kyle Richardson]

My favorites are Hanks lounge speakers found on page 3
Classics!

 

[Brett DiMichele]

Kyle,

Yep something naughty about leopard stripped speakers ehh!

 

[Alan Ross]

Link Removed