KISS DP 508 Progressive scan - How?

Discussion in 'Playback Devices' started by Joris, Dec 4, 2004.

  1. Joris

    Joris Auditioning

    Joined:
    Nov 19, 2004
    Messages:
    4
    Likes Received:
    0
    Hi!

    Sorry for asking something which may seem obvious to most here, but I simply don't know and the manual isn't too elaborate..

    I've recently purchased a KISS DP 508 DVD player, it has the following connections:

    * S-Video
    * Video
    * Optical
    * Coax
    * Scart
    * Red/white stereo

    My intention is to hook it up with my Sony VPL-VW10HT projector, also recently purchased.

    The projector has the following connections:

    * S-Video
    * Video
    * INPUT A (R/G/B/Hsync/Vsync)
    * INPUT B (R/G/B/Hsync/Vsync)

    Both units are capable of progressive scan and I should definately try and use it, from what I read.

    Questin is... how? I'm new to this, so I don't know how it works. Which of the outgoing connections from the DVD player 'carries' the progressive scan signal? All? S-Video? SCART?

    In the manual for the projector it indicates I should connect R/G/B (is that the same as RCA?) to INPUT A in order to use the progressive scan. Do i require an S-Video 3 RCA cable?

    Anybody who can help me out, before i go spending money on wrong cables?

    Thanks!
     
  2. Lev-S

    Lev-S Second Unit

    Joined:
    Jun 29, 2003
    Messages:
    324
    Likes Received:
    0
    to use progressive scan, you have to use component via SCART.
     
  3. Joris

    Joris Auditioning

    Joined:
    Nov 19, 2004
    Messages:
    4
    Likes Received:
    0
    So i'd have SCART as output from my DVD player splitting up into RCA for input to the projector?
     
  4. Lev-S

    Lev-S Second Unit

    Joined:
    Jun 29, 2003
    Messages:
    324
    Likes Received:
    0

Share This Page