Dalton
Screenwriter
Jason,
Any decent RCA cable will be fine to hook up your amp. You need to run the RCA cables from the main l/r pre-outs on the 3802 to channels 1 and 2 on the amp. Set the gains to max(THX on the 1500 i believe). Hook your speaker wire to the appropriate channels on the amp. When you turn the power on, calibrate immediatly. I believe you will find you have to adjust the main channel levels lower than they were before due the increased power. You should notice a significant perfromance increase over the 3802's internal amps(which are good, but no match for the 1500). Enjoy!
Dalton
P.S.
Seems Yogi beat me to it!
Any decent RCA cable will be fine to hook up your amp. You need to run the RCA cables from the main l/r pre-outs on the 3802 to channels 1 and 2 on the amp. Set the gains to max(THX on the 1500 i believe). Hook your speaker wire to the appropriate channels on the amp. When you turn the power on, calibrate immediatly. I believe you will find you have to adjust the main channel levels lower than they were before due the increased power. You should notice a significant perfromance increase over the 3802's internal amps(which are good, but no match for the 1500). Enjoy!
Dalton
P.S.
Seems Yogi beat me to it!