JBL NSP1 and JBL PB-10 Sub

Discussion in 'Archived Threads 2001-2004' started by JesseA, Feb 6, 2002.

  1. JesseA

    JesseA Agent

    Joined:
    Jan 7, 2002
    Messages:
    28
    Likes Received:
    0
    I have the sub in LFE mode, and the speakers set to small. What would be the optimal crossover to set on the sub?
     
  2. ozric_smith

    ozric_smith Agent

    Joined:
    Dec 22, 2001
    Messages:
    44
    Likes Received:
    0
    LFE mode defeats the subs crossover and user the bass management on the amp, just what you want.
     
  3. Paul Clarke

    Paul Clarke Supporting Actor

    Joined:
    Jan 29, 2002
    Messages:
    998
    Likes Received:
    0
    So set your receiver crossover to 80Hz and you're all set. This line level input saves an awful lot of wiring. Unless there are certain peculiarities with your room acoustics and your speaker set, this should be sufficient. Otherwise you will have to experiment with various crossover settings on your sub.
     

Share This Page