ISP Calibration and Red Push???

Discussion in 'Archived Threads 2001-2004' started by Eugene Hsieh, Aug 6, 2001.

  1. Eugene Hsieh

    Eugene Hsieh Supporting Actor

    Joined:
    Jun 30, 1997
    Messages:
    550
    Likes Received:
    0
    TV: Toshiba 34" widescreen CW34XC2 direct view CRT. (NOT rear projection.)
    DVD: Panasonic RP91, Apex AD-600A, RCA 5200p
    With the Panasonic RP91 in progressive mode, the movie images have never been better. Crystal clear images. However, no matter what I do, I always have that @#$@!*^(% red push.
    Will ISF calibration solve or minimize red push on my direct view?
    This is damn irritating. One would think that if one spends 4 digit dollars on a TV, at least the colours would be OK.
    ------------------
    Eugene Hsieh, VisorCentral FAQ Editor
    1000 km on a tank of gas??? Check out the Prius and drive the future now!
     
  2. Eugene Hsieh

    Eugene Hsieh Supporting Actor

    Joined:
    Jun 30, 1997
    Messages:
    550
    Likes Received:
    0
    By the way, Avia says I have about a 20ish% red push, with the green in blue within about +/-5%.
    What about one of those gold yeringto mini attenuators ? They're meant for the Mitsubishi TVs with 25% red push, so I figure this is close enough.
    Other options? I'm a bit wary about the Radio Shack stuff.
    ------------------
    Eugene Hsieh, VisorCentral FAQ Editor
    1000 km on a tank of gas??? Check out the Prius and drive the future now!
    [Edited last by Eugene Hsieh on August 06, 2001 at 01:42 AM]
     
  3. ThomasL

    ThomasL Supporting Actor

    Joined:
    Mar 13, 2001
    Messages:
    963
    Likes Received:
    0
    The red push attenuator fix should work but only, of course, for your component input.
    cheers,
    --tom
     
  4. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings
    The colour decoder is accessible via the design menu in the TV set. A knowledgable ISF guy can fix it for you. If you are willing, you can fix it yourself too.
    There are some 4 to 5 parameters that you have to change to completely tame the red push.
    Regards
    ------------------
    [​IMG]
    Michael @ The Laser Video Experience
     
  5. Eugene Hsieh

    Eugene Hsieh Supporting Actor

    Joined:
    Jun 30, 1997
    Messages:
    550
    Likes Received:
    0
     

Share This Page