How to fix a screen geometry problem on a direct view tv

Discussion in 'Displays' started by KonradN, Aug 6, 2003.

  1. KonradN

    KonradN Stunt Coordinator

    Joined:
    Dec 3, 2000
    Messages:
    131
    Likes Received:
    0
    I just got the samsung tantus hdtv direct view tv and while the overall picture is very impressive the screen geometry is not quite perfect. Any horizontal line through the bottom half of the screen is slighly bend upwards in the middle. This defect is probably within factory tolerance but still annoying to me and I was wondering if there is a way to fix this. I did some searches on this forum and it sounds like isf calibraters will not fix geomtry problems on a direct view tv. So is there nothing i can do other than go through another set and potentially end up with the same issue?
     
  2. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings

    That is about it ... sorry to say. A general weakness of flat tube designs.

    Spherical tubes have fewer problems like this.

    Regards
     

Share This Page