how to connect a BFD DSP1124

Discussion in 'Speakers' started by Alain.P, Aug 5, 2004.

  1. Alain.P

    Alain.P Extra

    Joined:
    Aug 28, 2003
    Messages:
    22
    Likes Received:
    0
    Good morning all,

    I just bought a DSP1124 and after reading the manual i am unsure about how to connect it to my system.

    I have an Outlaw 771 amp with a 950 pre, and only one sub connected thru the LFE.

    How do i connect the DSP1124 to be able to equalize my sub

    Thanks in advance

    Alain
     
  2. PaulDA

    PaulDA Cinematographer

    Joined:
    Feb 9, 2004
    Messages:
    2,693
    Likes Received:
    93
    Location:
    St. Hubert, Quebec, Canada
    Real Name:
    Paul
  3. Alain.P

    Alain.P Extra

    Joined:
    Aug 28, 2003
    Messages:
    22
    Likes Received:
    0
    Yes i know this site but it does not say much about how to connect the 1124 to a home theater
     
  4. Lee Carbray

    Lee Carbray Second Unit

    Joined:
    Oct 23, 2002
    Messages:
    308
    Likes Received:
    0
    Huh? did you read this section?



    Basically from your prepro run the LFE to either the left or right input on the BFD and then the corresponding output to your sub. You will notice the BFD does not have RCA type connections. That is why you need the 1/4 inch adapter. Here is an example of one.Adapter
     
  5. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,061
    Likes Received:
    25
    Location:
    Katy, TX
    Real Name:
    Wayne
    If you’re like me and don’t like to use cheezy adapters, you can pick up cables with 1/4”-RCA ends at any guitar shop.

    Regards,
    Wayne A. Pflughaupt
     

Share This Page