HK AVR 525 set-up

Discussion in 'AV Receivers' started by kanian, Nov 12, 2003.

  1. kanian

    kanian Auditioning

    Joined:
    Oct 20, 2003
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    Hi guys,
    You've already helped me a couple of times so I'm sure I can count on your expertise again. I've got HK AVR 525 with B&W DM 603 as mains and DM 601 at surrounds. My problem is the equal speakers setup for different input sources. Whenever, I have DVD or satellite or CD input the volume is always different. In addition, when I switch it to DVD the level of center is rather low whereas the fronts and surrounds are relatively higher volume. Is there any easy setup so I can have my center clearly loud so the other speakers don't overshadow it? So far, I haven't configured the system with EzSet, perhaps, I should do it?
    thanks for your help. Adam
     
  2. Doug Brewster

    Doug Brewster Second Unit

    Joined:
    Jul 22, 2002
    Messages:
    325
    Likes Received:
    0
    Trophy Points:
    0
    You could use the Ezset but another way is to use the OSD to set your channels. It's one of the options when you punch
    AVR and then
    OSD.
    Navigate down to Channel Adjust.
    Enter it and set it where you want it.
     
  3. Dave Jewett

    Dave Jewett Agent

    Joined:
    Apr 25, 2002
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    0
    Also remember with HK you have different speaker level settings for each input and (I think) each surround mode, so once you find a setting that works for your speakers you'll need to modify the inputs and modes that you use.

    Dave
     

Share This Page