Help, problem with Toshiba convergence.

Discussion in 'Displays' started by Chris>R, Dec 28, 2003.

  1. Chris>R

    Chris>R Auditioning

    Joined:
    Dec 27, 2003
    Messages:
    2
    Likes Received:
    0
    I have a 50" Toshiba RPTV that is about 4 yrs. old. In the last month or so I can see red ghosting (image seems to tilt to the right with red lines)in the top center and left sections of the screen. When I try to adjust the convergence, the red "cross is not straight up and down in sections 1 and 2. In these sections the red cross is at an angle to the right and can't be lined up with the white target. The blue cross is OK in all sections and the red cross is OK in sections 3 through 9. Any ideas for the newbie? How can I re-align the red cross in sections 1 and 2? Thanks in advance.
     
  2. Chris>R

    Chris>R Auditioning

    Joined:
    Dec 27, 2003
    Messages:
    2
    Likes Received:
    0
    Anybody? Please help, this is driving me crazy. Thanks
     
  3. Eric Samonte

    Eric Samonte Screenwriter

    Joined:
    Mar 31, 1999
    Messages:
    1,318
    Likes Received:
    0
    Don't know if it would help but u can try shutting off the blue gun so u can adjust the red to the green. This is of course using the service menu to access the 56 point convergence.
     

Share This Page