Help!! Is my SA-XR50 broken!!??

Discussion in 'AV Receivers' started by DorianBryant, Jun 26, 2004.

  1. DorianBryant

    DorianBryant Screenwriter

    Joined:
    Apr 14, 2004
    Messages:
    1,555
    Likes Received:
    0
    Trophy Points:
    0
    I can't get anyone to respond at AVS! I cannot tell if their is something wrong with my Panny XR50. I called Panasonic and they do not have a clue.

    The receiver is in DTS NEO 6 mode and using an optical signal from dish (PCM). If I set the speakers to large then there is no sound from the subwoofer. I set the mains to large and the sub still works. When i change the center and/or the surrounds to large--no sub. In NEO 6 i can only run the mains on large and use the sub.

    Is this normal? In the same config. (all large) I can use PLII and hear the sub. In Neo 6, no sub with any speaker config, except the mains, set to large.

    I don't plan on running all the speakers on large, but if there is a problem i would exchange the receiver.
     
  2. Jimi C

    Jimi C Screenwriter

    Joined:
    Feb 22, 2004
    Messages:
    1,209
    Likes Received:
    1
    Trophy Points:
    0
    Sounds normal to me. [​IMG]
     
  3. DorianBryant

    DorianBryant Screenwriter

    Joined:
    Apr 14, 2004
    Messages:
    1,555
    Likes Received:
    0
    Trophy Points:
    0
    Thanks Jimi. I talked to 2 techs from Panasonic and they had no idea.
     

Share This Page