Help, can't get sound from SB on Marantz SR-7500?

Discussion in 'AV Receivers' started by Steve Young, Dec 19, 2004.

  1. Steve Young

    Steve Young Stunt Coordinator

    Joined:
    Feb 16, 1999
    Messages:
    93
    Likes Received:
    0
    Real Name:
    Steve Young
    I just finished hooking up my new AVR (Marantz SR-7500) and I am having a problem getting an output from the Surround Back speaker. I have just one SB speaker and set it to this in the Setup Menu, but on the channel test I get no output? The speaker is connected to the SBL speaker output. However I am able to get output to this speaker if I turn the multi-room option on?
    Am I over-looking something here?

    Any help is appreciated.
    Steve
     
  2. John Garcia

    John Garcia Executive Producer

    Joined:
    Jun 24, 1999
    Messages:
    11,571
    Likes Received:
    24
    Location:
    NorCal
    Real Name:
    John
    Sounds like you have the rears configured for zone 2 rather than zone 1. Is there a config for that in the menu?
     
  3. Steve Young

    Steve Young Stunt Coordinator

    Joined:
    Feb 16, 1999
    Messages:
    93
    Likes Received:
    0
    Real Name:
    Steve Young
    No, that was the only way I could get sound out of the rear by enabling the Zone 2 (Multiroom). But I finally got it to work, and this was by resetting the AVR back to original, then manually configuring the speakers. Using the M.R.A.C. won't work for some reason.
    Anyway, I have it working now, but would have been nice to use the auto setup.

    Steve
     

Share This Page