Driver replacement help!!

Discussion in 'Home Theater Projects' started by Travis-J, Jun 14, 2003.

  1. Travis-J

    Travis-J Agent

    Joined:
    Jun 4, 2003
    Messages:
    41
    Likes Received:
    0
    Trophy Points:
    0
    I bought a pair of Sony SS950 and want to replace the drivers, just use the cabinet. It has been brought to my attention that it may be hard to do the crossovers. I don't know alot about speaker building but would like to try. The woofer is a 10" and I believe the tweet is a 4 inch but sits in a 2 1/2" hole. I would like any suggestions as to what would be the best approach what drivers to use. Even advise "don't bother" would be appreciated. I want to use these as my surrounds. I can take pics if need be.
    PLZ HELP!!
     
  2. Travis-J

    Travis-J Agent

    Joined:
    Jun 4, 2003
    Messages:
    41
    Likes Received:
    0
    Trophy Points:
    0
    These are two choices parts express gave me for the woofers.
    Any thoughts?

    Part Number:
    290-088
    PIONEER W25GR31-51F 10" BUTYL SURR WOOFER Power handling: 90 watts RMS/130 watts max * Voice coil diameter: 2" * Impedance: 8 ohms * Frequency response: 26-6,000 Hz * Magnet weight: 30 oz.. * SPL: 90 dB 1W/1m * Vas: 4.77 cu. ft. * Xmax: 3.0mm * Qms: 4.17 * Qes: .36 * Qts: .34 * Fs: 26 Hz. $44.95 EA


    Part Number:
    296-105
    AUDAX PR240Z0 10" AEROGEL WOOFER Power handling: 100 watts RMS * Voice coil diameter: 2" * Le: 1.11 mH * Impedance: 8 ohms * DC resistance: 6.5 ohms * Frequency response: 35-2,000 Hz * Fs: 35 Hz * SPL: 90.0 dB 2.83V/1m * Vas: 2.90 cu. ft. * Qms: 11.37 * Qes: .39 * Qts: .38 * Xmax: 4.0 mm
     

Share This Page