DIY rumble filter? (1 Viewer)

[Seth_L]

Are there any DIY rumble filter kits in existance? I'm going to be using a pro-amp to power my Tumult (PR enclosure) and the driver will unload below 15Hz. I'd like to have a fairly aggressive rolloff below the frequency I chose to roll.

Seth

 

[Anthony_Gomez]

are you handy at soldering up your owns stuff?
you can always look at existing circuits (like at Rod Elliots site) and re-build on your own bread board.

Alternately, you can get John Pomanns kit for $47 and build it up
http://www.snippets.org/filters/subwooferkit.htm

...or...you can get SVS's black box for quite a bit more.

 

[Seth_L]

Maybe I'll just dust off the textbook from my Analog Filters class that I took in college (2 years ago) and design my own from the ground up. Yes, I am fairly handy with a soldering iron. I was always the person doing the soldering on our projects.

Seth

 

[Anthony_Gomez]

the info at www.linkwitzlabs.com/filters.html will be ofsome use to you.

 

[Ellen]

Rod just posted a new subsonic/rumble filter circuit project at his website.