1. Sign-up to become a member, and most of the ads you see will disappear. It only takes 30 seconds to sign up, so join the discussion today!
    Dismiss Notice

crossovers for dipole application?

Discussion in 'Archived Threads 2001-2004' started by Philip_G, Nov 7, 2001.

  1. Philip_G

    Philip_G Producer

    Joined:
    Nov 13, 2000
    Messages:
    5,030
    Likes Received:
    0
    Trophy Points:
    0
    I'm beginning this project
    http://www.hometheaterforum.com/uub/...ML/003340.html
    and I'm planning to use 4 dayton 5.25's and 4 dayton 1/2" dome tweeters, but I'm not sure how to go about the crossover.
    the drivers are all 8 ohm, so I don't want to parallel them for 4 ohms or series them for 16, does anyone make a crossover for this application specially?
    edit.. oops meant bipole
    [Edited last by Philip_G on November 07, 2001 at 10:28 AM]
     
  2. James Mudler

    James Mudler Stunt Coordinator

    Joined:
    Feb 1, 2001
    Messages:
    207
    Likes Received:
    0
    Trophy Points:
    0
    Check speakerbuilder.net. He has a two way x-o with the same drivers. You could build two networks per side and reverse the phase on one. Still will not solve the total impedance issue. Good luck
    ------------------
    Luke, I'm your father
     

Share This Page