control out on my B&K processor....

Discussion in 'AV Receivers' started by Josh Wolfman, Jul 25, 2004.

  1. Josh Wolfman

    Josh Wolfman Stunt Coordinator

    Joined:
    Dec 19, 2002
    Messages:
    149
    Likes Received:
    0
    What type of plug do I use for this? I would like to connect this to my Marantz monoblocks so they turn on when I power up the B&K. I purchased 1/8 mini plugs (stereo), but they don't seem to fit. Anyone have any suggestions? Thx
     
  2. Robert Cowan

    Robert Cowan Supporting Actor

    Joined:
    Nov 10, 2003
    Messages:
    504
    Likes Received:
    0
    they should fit... they use standard stereo mini jacks i thought...

    try again, just use a pair of headphones (with the processor off) to see if the size fits. but it should. but then you have to configure the controls to work what you want them to.
     
  3. anth_c

    anth_c Stunt Coordinator

    Joined:
    Jul 17, 2002
    Messages:
    79
    Likes Received:
    0
    You need to use a 3.5 mm mono jack (I think it is the exact same size as a 1/8 inch jack).
     
  4. Chip E

    Chip E Screenwriter

    Joined:
    Nov 25, 2000
    Messages:
    1,165
    Likes Received:
    0
    I use standard 1/8" mini to 1/8" mini plugs from my Ref50 out to both my amps, a Ref200.2 & Ref200.5
     

Share This Page