Can someone model Treo SS drivers for me?

Discussion in 'Home Theater Projects' started by GabeT, Dec 15, 2004.

  1. GabeT

    GabeT Extra

    Joined:
    Aug 2, 2002
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    0
    I have two of the 15" and am going to build an enclosure mostly for music but some home theater (So I want to retain as much low end as possible). The specs can be found here:

    http://treoonline.com/ssi.html
    They are the SSi 15.44

    I really appreciate any help! [​IMG]

    Thanks
     
  2. Shawn Keeler

    Shawn Keeler Stunt Coordinator

    Joined:
    Feb 2, 2003
    Messages:
    190
    Likes Received:
    0
    Trophy Points:
    0
    I am also using Treo woofer's for my home theater set-up. Keeler Theatre Can't beat them, they are bullet proof. Gabe, what was your question again? I am in touch with some of the Treo factory personel, and could probably give you some help.
     
  3. Jason Dalton

    Jason Dalton Stunt Coordinator

    Joined:
    Feb 20, 2004
    Messages:
    174
    Likes Received:
    0
    Trophy Points:
    0
    Maybe someone else can verify this, but to me these look like they are going to be tough to use for home theater with a decent amount of EQ.

    On a side note, the spec sheets on their website are very well done. Very accessible.
     
  4. GabeT

    GabeT Extra

    Joined:
    Aug 2, 2002
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    0
    I modeled them myself and they seemed to have very good extension when put in a 4 cu ft box tuned to mid 20's. They seemed to do better than the Tempest between 20-35 hz.. but that could be from an error in my modeling :b
     
  5. Jason Dalton

    Jason Dalton Stunt Coordinator

    Joined:
    Feb 20, 2004
    Messages:
    174
    Likes Received:
    0
    Trophy Points:
    0
    were you getting a huge bump around 40Hz?
     

Share This Page