Can anyone model this box for me?

Discussion in 'Archived Threads 2001-2004' started by Kevin Kloet, Aug 2, 2001.

  1. Kevin Kloet

    Kevin Kloet Agent

    Sep 25, 2000
    Likes Received:
    Going to build on weekend... sealed box.
    impedance: 4 ohm
    fs: 30 hz
    Qms: 5.38
    Qes: 0.39
    Qts: 0.36
    Sd: 54.26 inches squared (0.035 meters squared)
    Vas: 1.625 cubic feet (46L)
    Cms: 2.65E-04
    Mms: 3.739 oz (106g)
    Bl: 13.8 Tm
    Xmax: 0.31 in (8 mm)
    Spl: 87 dB
    Pe: 200 W RMS
    Any help would be greatly appreciated... it's a rockford fosgate sub going into a sealed box of these internal dimensions:
    13.5in x 12in x 9.5in
    or 1354.3 sq. in (after subtracting the volume of the cone)
    Thanks a lot... hopefully I can catch (with your help) and glaring errors before I begin.
  2. Greg Monfort

    Greg Monfort Supporting Actor

    May 30, 2000
    Likes Received:
    Looks OK to me. I assume that since it starts rolling off around 200hz and doesn't produce any LF at any volume to speak of that it's going into a vehicle.
    Loud is beautiful, if it's clean

Share This Page