box suggestions for Infinity Kappa 12" sub ...

Discussion in 'Archived Threads 2001-2004' started by Jason Hammerly, Mar 4, 2002.

  1. Jason Hammerly

    Jason Hammerly Supporting Actor

    Joined:
    Oct 28, 1999
    Messages:
    739
    Likes Received:
    0
    I have an Infinity Kappa 12" sub in my car that I'd like to use in my HT. It's the one with the green cone and is a single 4 hm voice coil. I'd like it to have max extension and would prefer a sealed enclusure. Any ideas? Thanks

    Jason
     
  2. Mike_A

    Mike_A Stunt Coordinator

    Joined:
    Oct 7, 2001
    Messages:
    153
    Likes Received:
    0
    check out http://www.linearteam.dk/ for some free box modeling software. Play around with it and see what you come up with. of course, you'll need the T/S parameters for that sub - should be available from the Inifinity website.
     
  3. Greg_R

    Greg_R Screenwriter

    Joined:
    Apr 9, 2000
    Messages:
    1,996
    Likes Received:
    0
    Location:
    Portland, OR
    Real Name:
    Greg
    Here are the T/S parameters for the DVC version of the 12" Kappa driver.
     
  4. Jason Hammerly

    Jason Hammerly Supporting Actor

    Joined:
    Oct 28, 1999
    Messages:
    739
    Likes Received:
    0
    Actually it looks like the driver is already setup in the database. 1.85 ^3 box sealed looks to be the optimum size. It drops off rather quickly from 30 hz on down looks like though. Any suggetions on how to get more extension using a sealed eclosure. It's the 120.1 se in the box building software dbase. Thanks for the help so far.
     

Share This Page