Binding post

Discussion in 'Archived Threads 2001-2004' started by Rick Thomas, Apr 3, 2002.

  1. Rick Thomas

    Rick Thomas Agent

    Joined:
    Feb 27, 2002
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    0
    Can someone recommend some good binding post for my sono sub

    and where to get them thanks.
     
  2. jeff lam

    jeff lam Screenwriter

    Joined:
    Jun 4, 2001
    Messages:
    1,798
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    San Jose, CA
    Real Name:
    Jeff Lam
    I chose these from Partsexpress:
    http://www.partsexpress.com/pe/showd...14966&CATID=39
    They are a little pricey but the quality is superior to just about anything else you'll find. The dual terminal one is also popular but I only had 1.5" to work with on my endcap and the dual terminal one wouldn't fit.
     
  3. Mike Strassburg

    Mike Strassburg Second Unit

    Joined:
    Nov 4, 2001
    Messages:
    421
    Likes Received:
    0
    Trophy Points:
    0
    Also check out Madisound as I got something VERY similar for $3.20 shipped....
     
  4. PeterV

    PeterV Agent

    Joined:
    Dec 17, 2001
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    0
    Also used the Yung(Y6-PostB) binding posts from Madisound. They have a 45mm long shaft and worked good for my sonosub application.
     
  5. Greg_R

    Greg_R Screenwriter

    Joined:
    Apr 9, 2000
    Messages:
    1,996
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Portland, OR
    Real Name:
    Greg
    I got the Dayton's and they work well. Since my enclosure was 3" thick I had to sink a hole from the inside (posts weren't long enough). I filled these holes with sealant after fastening the connectors (figured it would keep the wire from seperating from the post connector).
     

Share This Page