BFD question (1 Viewer)

[Ken Lopata]

Is this the correct way of doing this? I've run a frequency sweep with Stryke Basszone CD and charted my frequency respone from 12.5 to 80hz with all speakers going. Do I now add the Rat Shack correction values to these numbers before I adjust the peaks with the BFD?
According to the chart 25 hz gets a +5 and 31.5 gets a +3, does 28hz get a +4 even tho it's not on the correction table? Another example would be according to the table 40hz gets a +2.5 and 50hz gets a +1.5, I would think 45hz would get a +2.0. Is my thinking correct.
Thanks
Ken

 

[Brian_J]

According to the chart 25 hz gets a +5 and 31.5 gets a +3, does 28hz get a +4 even tho it's not on the correction table? Another example would be according to the table 40hz gets a +2.5 and 50hz gets a +1.5, I would think 45hz would get a +2.0. Is my thinking correct.

Extrapolation is fine but it sounds like you are getting a little too detailed.
Brian
------------------
Zed's Dead Baby...