Bass Mgnt-wise, no crossover on a sub is not a problem for my Denon 2900, right?

Discussion in 'Playback Devices' started by John Pine, Jan 14, 2005.

  1. John Pine

    John Pine Supporting Actor

    Joined:
    Feb 27, 2002
    Messages:
    988
    Likes Received:
    0
    Real Name:
    John Pine
    I’m considering buying a SVS PB10-ISD to replace my recently sold Velo CHT-12. I’m running a Denon DVD-2900 for a Hi-Res Audio setup with all channels set to “Small”. My SACD/DVD-A signal goes to a H/K AVR-525 that I’m using as a pre-amp. I’m using the "6 Channel Direct" input on the 525 so there is no bass management done in the 525. So, as long as I have the DVD-2900 set to all “Small” with a sub the internal x-over on the 2900 should be 80Hz. Right?

    My 5.1 set:

    Toshiba 35"
    Parasound HCA-2003(L/C/R)
    h/k PA2000(rears)
    h/k AVR 525(pre-amp)
    Denon DVD-2900
    JBL S310-II's
    JBL S-Ctr II
    JBL S36-II's(rears)
    No SUB! Velodyne CHT-12 (recently sold)
    23'x18'x14' vaulted ceiling (LxWxH)
     
  2. ScottCHI

    ScottCHI Screenwriter

    Joined:
    Feb 21, 2004
    Messages:
    1,292
    Likes Received:
    0
    correct
     
  3. John Pine

    John Pine Supporting Actor

    Joined:
    Feb 27, 2002
    Messages:
    988
    Likes Received:
    0
    Real Name:
    John Pine
    Thx Scott. I'm actually considering running a dual PB10-ISD setup. Man....I guess I've got it bad.
     

Share This Page