Bass boost in LSPcad

Discussion in 'Archived Threads 2001-2004' started by Jedd, Apr 30, 2002.

  1. Jedd

    Jedd Second Unit

    Joined:
    Feb 5, 2002
    Messages:
    298
    Likes Received:
    0
    How do I model bass boost in the LSPcad?
    Like this (sealed Tempest, 150L)?
    [​IMG]
    I'd like to keep 1dB boost at 20-24Hz, so it will help room response to flatten the curve. And I doubt that I will ever need
     
  2. Jeff Rosz

    Jeff Rosz Second Unit

    Joined:
    Sep 24, 2000
    Messages:
    335
    Likes Received:
    0
    hi jedd,

    you can try going into the parametric equalizer section of the program and set one of the bands for 1dB boost @ 20-24Hz. i'm not up on the amp mod stuff, so i dont know the width of the boost to add. i'm sure someone will post the bandwidth for you. play with different settings and then look back at the response graphs and see whats happening.
     
  3. Jedd

    Jedd Second Unit

    Joined:
    Feb 5, 2002
    Messages:
    298
    Likes Received:
    0
    That's about what I did:

    put 20,21,22,23,24 Hz into equalizer and boosted each for 1dB (the picture is above).

    But I never did it before, so I'm not sure if I did it right and cannot estimate the curve.
     

Share This Page