b&w speaker stands

Discussion in 'Speakers & Subwoofers' started by greg_bun, May 19, 2003.

  1. greg_bun

    greg_bun Extra

    Joined:
    May 14, 2003
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    0
    What stands are used for the DM602? Or for the DM303? Do these stands allow for the speaker box to be attached to the stand? Do the retail stores in the US that sell these speakers also sell the stands? How much?
     
  2. Bob-N

    Bob-N Supporting Actor

    Joined:
    Jul 26, 2001
    Messages:
    915
    Likes Received:
    0
    Trophy Points:
    0
    There are no speaker stands for the 600 (nor the 300's) series made by B&W specifically for them. There are no mounting holes in the 600 series so you'll have to buy regular stands and use blue-tak to secure them to the stand.

    Bob
     
  3. ryan_m

    ryan_m Stunt Coordinator

    Joined:
    Jun 22, 2000
    Messages:
    114
    Likes Received:
    0
    Trophy Points:
    0
    I recently purchased 602s and bought stands with them. The stands came in B&W boxes but the stands don't actually say B&W on them. You definitely can't attach them to the stand. They just came with little tabs which I suppose help them stay on a bit (whenever the dogs run by them I get a bit nervous though).
     
  4. Mark C.

    Mark C. Supporting Actor

    Joined:
    May 21, 1999
    Messages:
    557
    Likes Received:
    0
    Trophy Points:
    110
    You'd probably be better off purchasing Sanus or other well known brand of stand rather than purchasing "B&W'' stands. My hunch is B&W dealer stands will cost 30 percent more but provide absolutely no advantage over Sanus et al.
    I know. I have very sturdy and heavy B&W stands for my CDM1SEs, but much cheaper (and just as good) Sanus stands for my rear 601s.
     
  5. Thai_Van

    Thai_Van Auditioning

    Joined:
    Apr 14, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    i'd brought a pair of 602 s3 along with a pair of b&w stand (18") for $90. It does have the B&W logo on the base, and it's match well with the speakers...
     
  6. Brian E

    Brian E Screenwriter

    Joined:
    Aug 12, 2000
    Messages:
    1,636
    Likes Received:
    0
    Trophy Points:
    0
    I've got Sanus stands both front & rear in my setup & they work great. Cheap too. When I talked to my B&W dealer about the stands pictured in the 600 series 3 catalog and he told me he could order them, but they were $200+ depending on height. The Sanus stands were under $100 and look real nice with my B&W's.
     
  7. greg_bun

    greg_bun Extra

    Joined:
    May 14, 2003
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    0
    What B&W speakers do you have in front/rear? What is the model number of the stands you have? How high are the stands for the front/rear?
     
  8. Brian E

    Brian E Screenwriter

    Joined:
    Aug 12, 2000
    Messages:
    1,636
    Likes Received:
    0
    Trophy Points:
    0

Share This Page