Another sub done (1 Viewer)

[AllanRW]

XLS driver with twin 10" PRS 360 watt plate amp with remote.
1.5cft
Cherry veneer
BH5

Not that bad for a 15.5" cube.

Al

 

[Jack Gilvey]

Very cool...love it. What's it tuned to?

 

[Geoff L]

Allan

Pretty little bugger

Very nice work as usual!

Ditto to Jack, whats the aprox tune?

Have any in room output data yet also?

 

[Mitch N]

Beautiful!

 

[Cam McFarland]

Ditto!!

How is the "LFE" hooked up to that plate amp??

 

[Owen Bartley]

That is one FANTASTIC looking little sub. Great job. How does it sound?

 

[AllanRW]

35ltr cabinet tuned to 20hz hits very good for the size.
Still really never got time to get it all broke in.
After a small work out it got shipped out.

Al

 

[Jack Gilvey]

Are you using boost in the amp? What's the max Mms on the PRs?
Thanks!

 

[Cam McFarland]

How is the "LFE" hooked up to that plate amp??

 

[JimPeitersen]

Cam,
What are you asking? If you mean the LFE signal from your receiver/pre-pro, then the simple answer is: RCA cable. You simply run a cable to the plate amp, set internal crossover to its highest setting, adjust the level, and enjoy.
JP

 

[Cam McFarland]

Thanks Jim.....it looks as though it is a L/R set-up.
Do you do as Muneeb suggested & use a splitter?
My LFE is a single RCA plug.

 

[Aaron Gilbert]

Al,

Awesome looking subwoofer! It's nice to see something other than a black box, love the rounded corners.

The cherry veneer gives me the urge to refinish my subwoofer in the shade it was originally supposed to be, over a year ago.Thanks!


Aaron Gilbert

 

[Aaron Gilbert]

Cam,

Any subwoofer having both L and R RCA inputs can certainly use just one of those. Using a splitter at the end of your receiver's/processor's LFE cable and plugging into the other input will also work. It just serves to increase the subwoofer's sensitivity to adjusting the subwoofer level at the receiver/processor, as the R and L inputs are combined by the amplifier.


Aaron

 

[Allen Ross]

Looks amazing, what was the process of finishing it? what stain is that?

 

[AllanRW]

Thanks.
Stain was a custom mix i did.
5 coats of wipe on poly

Al

 

[Javier_Huerta]

WOW... stunning!

 

[Bryan Michael]

looks like a good looking sunfire sub and i bet ti holds it own.

 

[Cam McFarland]

Allan,

What is the sub covered with? I presume it is made out
of MDF & covered with something?

- Cam

 

[AllanRW]

Cam
1.25" MDF veneered in Cherry with a custom stain.

AL

 

[Cam McFarland]

Allan,

When you say "veneered", do you mean like 1/4" plywood,
or is it a laminate, & if so, where did you get it?

Thanks....
- Cam