Amplifier Isolation platform recommendations

Discussion in 'AV Receivers' started by Phil_DC, May 20, 2003.

  1. Phil_DC

    Phil_DC Stunt Coordinator

    Jul 20, 2002
    Likes Received:
    I don't have room for my amplifier in my audio cabinet and would rather put it on an Isolation platform than a single shelf stand or just on the floor. So I have been looking around for a Isolation platform for it and wanted to see what others are using or would recommend.

    Thanks for any input!
  2. Brett DiMichele

    Brett DiMichele Producer

    Sep 30, 2001
    Likes Received:
    Buy a 4x8 sheet of 3/4" MDF cut out two pieces to the size
    that will best support your amp.. Buy a set of fancy feet
    from parts express for $20.00 router out cavities in both
    piece of MDF you cut out, glue them together drill a hole
    into the cavity and fill with sand. Then plug the hole and
    put a nice roundover or bevel on the edges and paint it with
    some spray on truck bed liner (textured black finish) and
    install the fancy chrome feet.. Woolah nice dampened amp
    stand [​IMG]

Share This Page