Amp/splitter question

Discussion in 'AV Receivers' started by Jared Lessl, Jun 7, 2003.

  1. Jared Lessl

    Jared Lessl Auditioning

    Joined:
    Jun 5, 2003
    Messages:
    2
    Likes Received:
    0
    I'm trying to put together an A/V network for my apartment. The video isn't too problematic, but the audio is driving me nuts. I'm not entirely sure if the hardware I think I need is available.

    The apartment will have one zone consisting of 4 or 5 speaker pairs in various rooms. I wish to be able to adjust the volume to each pair individually. Given the varying wattage of the speakers involved, this is basically a requirement; my first test with a all-in-one receiver and simple on/off speaker splitter produced intolerably lower volume in the big speakers.

    Would I need to split the incoming line-level signal to a separate amp for each speaker pair (ugh)? Or can I get a splitter that can adjust the volume to each outgoing line (preferable)?

    Thanks a bunch.
     
  2. Rob Rodier

    Rob Rodier Supporting Actor

    Joined:
    Jul 11, 2002
    Messages:
    538
    Likes Received:
    0
    this may be what you are looking for.

    Good luck

    -rob
     
  3. Jared Lessl

    Jared Lessl Auditioning

    Joined:
    Jun 5, 2003
    Messages:
    2
    Likes Received:
    0
    That's exactly what I was looking for. Thanks Rob.
     

Share This Page