amp recommendation (1 Viewer)

[Tom_Price]

Hi, can someone recommend a good 2 channel amp that puts out about 300 watts per channel?

I'm not really sure where to start looking for one.

Thanks,
TJ

 

[Scott_N]

Aragon makes a 300wpc two-channel amp.

 

[ChadLB]

Why do you feel you need 300 watts?

 

[Kevin_R_H]

Hi TJ,

What is your price range? You can easily spend $30,000 if you want to.

Remember, "number of watts" does not equate to "quality of sound".

Good luck,
Kevin

 

[Chu Gai]

Sunfire comes to mind

 

[DaleBesh]

220 Watts and up to 375 into 4 ohms, amplifiers do not get much more solid and transparent than this:

http://www.bkcomp.com/ProductsMainFr.html

 

[Karl_Luph]

I've seen other posts on crown and qsc 2 channel amps that are highly recommended.

 

[Tom_Price]

i'd like to stay around 500-1000 price range, but the only reason i say 300watts, is because my speakers are Polk Lsi25 and they are rated highest power rating of 300watts. It was just a figure to be a guide by.

 

[Arthur S]

Tom

You should be able to find a used Citation 7.1. This beast can be configured as 4X150 watts. 3 channel 2X150 plus 300+, or fully bridged for 2 channel at over 400 watts per channel.

The 7.1 listed for $2,800 when new.

I believe they can be had for less than $1,000.

Artie

PS They were designed from the ground up to run fully bridged so 4 ohms is not a strain at all.

 

[Sihan Goi]

I'm not sure how much it costs, but the Rotel RB-1090 sounds like a solid choice for a relatively low cost but high performing 2 channel amp with a high power rating(2x380W@8ohm)

 

[chun howe]

adcom gfa-5802
300x2 @ $2000.00

 

[Lee-M]

McCormack DNA2 Deluxe... you can pick it up for $2000-2500, used. The sweetest-sounding solid-state I've heard.