1. Sign-up to become a member, and most of the ads you see will disappear. It only takes 30 seconds to sign up, so join the discussion today!
    Dismiss Notice

Amp cable help needed

Discussion in 'Archived Threads 2001-2004' started by Duane R, May 13, 2002.

  1. Duane R

    Duane R Second Unit

    Joined:
    Mar 30, 2002
    Messages:
    308
    Likes Received:
    4
    Trophy Points:
    110
    It looks like I'll be getting a Parasound Amp (855) to mate to my Yamaha receiver. After searching the archives, it seems as though standard RCA cables will work fine for each channel. What should I use for the 12V trigger connection? And where can I get a decent price on this stuff? I'm thinking that Acoustic Research cables would work fine, as that's what I use for the bulk of my system now.

    TIA,

    Duane
     
  2. Camp

    Camp Cinematographer

    Joined:
    Dec 3, 1999
    Messages:
    2,301
    Likes Received:
    0
    Trophy Points:
    0
    I'd guess the Parasound will come with a 12v trigger cable.
     
  3. Bill Polley

    Bill Polley Second Unit

    Joined:
    Apr 18, 2002
    Messages:
    252
    Likes Received:
    0
    Trophy Points:
    0
    I did not get a cable with my 855. The 855 (at least mine) has 2 screw terminals in which to connect a + and - wire. Any 22 guage wire will work. Find out how the other end attaches to your Yamaha, you may need a 1/8" mono plug from Radio Shack.
     

Share This Page