Adjusting convergence, green blurry halo...

Discussion in 'Archived Threads 2001-2004' started by Dan Kolacz, May 9, 2002.

  1. Dan Kolacz

    Dan Kolacz Stunt Coordinator

    Joined:
    Dec 9, 1999
    Messages:
    83
    Likes Received:
    0
    Trophy Points:
    0
    Hello,

    I have a Sony 61HS20.

    I have been tweaking around in the service menu and noticed a couple things when adjusting convergence.

    When the grid is up.....There is a dark green halo surrounding some horizontal grid lines. It very minimal on the left and right ends of the line, and gets progressivly larger as you move toward the center of the screen.

    I would think that there should be no halo around the grid lines (is it possible?)

    Thanks
     
  2. Gregg Loewen

    Gregg Loewen Video Standards Instructor, THX Ltd.
    Insider

    Joined:
    Nov 9, 1999
    Messages:
    6,374
    Likes Received:
    32
    Trophy Points:
    6,610
    Location:
    New England
    Real Name:
    Gregg Loewen
    Patti,

    cover the blue and red lenses then look at the green grid by itself. How does it look. If not uniform across the entire screen, you will have to do a mechanical focus and try to find a point where it is uniform in size across the entire screen.

    regards

    Gregg
     

Share This Page