2039 PC or CT-80? Rears Small or Large?

Discussion in 'Archived Threads 2001-2004' started by Robert Barker, Jan 9, 2002.

  1. Robert Barker

    Robert Barker Stunt Coordinator

    Joined:
    Oct 22, 2000
    Messages:
    66
    Likes Received:
    0
    Quick question... I just integrated a 20-39 PC into my system. I have all speakers set to small and am letting the receivers crossover route everything below 80 Hz to the sub. The 20-39 PC replaced a Velodyne CT-80. What I would like to do is set the rear surrounds, Def Tech BP2X's, to Large and have them routed through the CT-80 with its cross over set at 60-80 Hz. Would I be better off leaving the rears set to small and having everything routed directly to the SVS, or have it routed through the CT 80 like I have now? Is their that much material below 40 Hz going to the rears?

    Thanks,

    Robert Barker

    Austin TX
     
  2. Robert Barker

    Robert Barker Stunt Coordinator

    Joined:
    Oct 22, 2000
    Messages:
    66
    Likes Received:
    0
    Anyone?
     
  3. Dan Hine

    Dan Hine Screenwriter

    Joined:
    Oct 3, 2000
    Messages:
    1,312
    Likes Received:
    0
    Robert,
    While I have not done that myself I recall reading several members that have a "rear" sub and they claim great results. Since you have the sub already I would say go ahead and try it and see what you think. I know that isn't a TON of help but it's the best I can do. [​IMG] Enjoy!
    Dan Hine
     

Share This Page