12 Volt Trigger

Discussion in 'AV Receivers' started by EdClay, May 10, 2005.

  1. EdClay

    EdClay Agent

    Joined:
    Mar 19, 2005
    Messages:
    30
    Likes Received:
    0
    I need to purchase a 12 volt trigger to go from my receiver
    to my amp. This needs to be a AC to DC transformer(I can plug into the receiver) with a wire and connector to plug
    into the amp. Where can I get this.
    Thanks in advance.
     
  2. John Garcia

    John Garcia Executive Producer

    Joined:
    Jun 24, 1999
    Messages:
    11,571
    Likes Received:
    24
    Location:
    NorCal
    Real Name:
    John
  3. JonStern

    JonStern Agent

    Joined:
    Dec 5, 2002
    Messages:
    32
    Likes Received:
    0
    I'm going to be doing the same thing as my receiver doesn't have a built-in trigger output. I haven't looked into it too deeply yet but you need something like this 12V Adapter/500mA and this
    Adaptaplug. My new Outlaw 755 amp can take a trigger signal that's from 6-12VDC. Note that there are other, more expensive adapters available at Radio Shack that deliver more current but I don't think that's necessary for this purpose. You may also get by with a 9-volt model.
     
  4. EdClay

    EdClay Agent

    Joined:
    Mar 19, 2005
    Messages:
    30
    Likes Received:
    0
    Thanks JohnG and JohnS: The Radio Shack solution is what I need.

    Ed Clayton
     

Share This Page