splitter

  1. Gort69

    4K HDMI switch or new AVR?

    Greetings, Earthlings - I come in peace. I just bought a new 4K Blu-ray player. It has 2 HDMI outputs (Audio + Video and Audio Only) right now, I have to use both since my Denon AVR doesn't pass 4K. The audio out goes to the DVD input on the receiver and the A+V output goes directly to the 4K...
  2. C

    HDMI Splitter use

    Has anyone used an HDMI Splitter to run video and audio to 2 different receivers? Success? Tips. I am running 4K HDMI from my cable box to my Denon AVR-X4500H and want to run another HDMI cable to my 2nd Denon amp which runs 4 Aura bass shakers. This will also hopefully keep sound/video sync...
  3. 59svj

    Splitter

    Hi, I purchased a OREI HD-102 1x2 1 Port HDMI Powered Splitter Ver 1.3 Certified for Full HD 1080P & 3D Support (One Input To Two Outputs). What works: Splitting HDMI OUT from Receiver via Cable Box to HDMI TV and a Projector What doesn't work: Splitting HDMI OUT from Receiver via a Laptop to...
  4. R

    Splitter and AV receiver

    Hi All hope someone can help HDMI 4K HDR splitter 1x4 directly from the cable box. All my tv's work for video no problem but with this setup audio to all except the projector which has no audio except hdmi. If I run the cable box directly to the 9.2 Onkyo 787 and then to the splitter sound...
  5. Incloud

    12v Trigger Splitter Hum

    I have only one 12v trigger on AVR so ran a splitter to my XPA-100 and LPA-1. Then the trigger out to my SVS PB-2000. All is good but I'm getting a low hum now from the sub. I've already tried different configurations with no luck and have the sub on a separate outlet now. No hum without...
  6. Mason10823

    3 TVs separate/same HDMI Input Ideas?

    so I have 3 "Video Displays", A projector and two televisions all have an HDMI input. I have a cable box, DVD player, Apple TV, and Sonos connect as Inputs. I need a way to run different video streams from the receiver to the "Video Displays" without spending more than $1000. This is tricky...