I spoke to a local vendor and they are proposing the following for around $14K. What are your thoughts on if i will be able to get club like SPL
Elunevision reference studio 4k audioweave screen slim (0.75 thin bezel), 125” 16:9
JVC NZ3 Projector
Denon 3700H 9.2 channel receiver (4k/8k)...
So we are finishing our basement and i want a decent HT setup. We do entertain a lot so wife wants a club like setup (dance party with around 30 guests who like loud music). Our basement is open and we want it to stay open as much as possible so want to avoid speakers on the floor and out budget...
Hey Sam,
Happy New Year.
I rana separate 20A line and connected everything to the same source. The noise is almost gone now.
I calibrated at 75%. Now the limitor on the amp is coming on once the volume hits 70.. at 65 it starts flashing but at 70 it is constant so i reduce the volume.
This is...
This is in an unfinished basement.
So i have one electrical outlet. regular not 15 AMP
From the outlet i have a long extension bar (25ft) cable run to behind the equipment.
I have a good quality philips power bar in which i have hooked the sub, tv, blu ray, game, cable box and receiver,
The...
Whats overcooking?
Yes the music is fine at any loudness level.. but when playing a scence with dialogues the voice distorts and there is speaker noise... it was all blu ray source
Rca to balanced. It is sheilded. Here is the link: http://www.long-mcquade.com/products/1629/Pro_Audio_Recording/Cables/Apex_Electronics/A105RXM_-_RCA_to_XLR_Male.htm
OK so i connected the amp. When i am playing music it is fine, but when there are quite scenes the speakers are really noisy.
Music playback is fine however it it is distorting when there are movie dialogues
Any ideas?
I calibrated them a full gain on the amp. Was that the problem?
I got the amp. I see jacks to connect the speaker but I don't see how I can connect the pre out from the receiver. There are several jacks but they are all new to me. Can you help?
There are inputs called balanced in PIN2 (+) and T/R/S TIP(+)
I got regular RCA cables to make the connection...
The specs on the AMP says it's 425W/channel at 4 ohms
How do i know this is peak or continous?
Here is the manual?
http://dl.owneriq.net/8/8b29d030-3cf8-496e-8bcf-992dbd2b32b5.pdf
Does RMS means continous? I have seen car amps with 140W RMS, how can a small car amp produce so much power
Thanks...
I have a hard drive connected to my xbox 360. I also have a galaxy phone. I can stream videos from the phone to the xbox using imediashare no problems. The problem is that the phone only has 16GB storage i want to download way more and store it for future use. I dont want to use a Laptop in...
I have a hard drive connected to my xbox. I also have a galaxy phone
IS there a way i can copy downloaded content from my phone to the xbox hard drive?
phone only has 1GB storage i want to download way more and store it for future use. I dont want to use a Laptop in between.
Any ideas?
I have one final technical questions..
Say i connect the amp for the argonauts and i am lhistening at volume level 40
So i crank it up to 80
How will the receiver increase the volume level on the amp
Does it increase the strength on the pre out? I am guessing so but are not sure. Is there any...