Search results

I went through every menu option that I can see and cannot seem to find the bulb option. I will try again tomorrow however and hopefully be able to post some instructions for others after that. Thanks.

Very true. Annoyingly loud.

20 minutes of movie watching. Still don't hear the loud fan engaging as could be heard previously in the 3-D setting. I'm guessing that was the problem. Completely bearable now.You guys are great!

I don't see eco mode but I do see that I normally have had in 3D mode option which is vibrant, best looking picture of the options but I see that when I put into cinema mode, video mode and others the noisy fan seems to turn off, then turn back on soon as its put back into 3D vibrant mode...

One more... Assuming I don't want to tear up the wall (don't think i have enough room b/f I hit garage floor concrete anyway) and simply want to replace the projector w/ similar quality w/ primary goal to get as quiet as a projector as possible, any recommendations. Would not be a major cost...

You are right in that the theater was sub-par in design, equipment although he was trying to keep cost down and, since we were overwhelmed in other home design, building aspects, I did not give this area adequate though, planning w/ him. Although he should have demanded. Most fault is on his...

Looks like it's the HC7800DW

That's great information. You guys are great. I will get the model number just for the heck of it when I'm back in town.I would say, the fan is probably not overly loud and I'm probably the only one who would notice it aside from type a personalities like you guys. I do think any sort of...

I've been running a Mitsubishi projector now for a little over a year. I don't recall the model number offhand but as a somewhat general question, do you guys know if there are significant differences between the sound generated from different projectors whether fan noise or whatever? I would...

You are probably right in that The output is probably more than adequate. I'm just never happy. I'll probably let it be.

Much of this flies over my head. Let me phrase it differently for my simple self. If you were building yourself a theater with a basement theater already in place, 12 by 25 feet, below garage, 8.5 feet ceilings, had to use 3 pinnacle bd650 for front sound and pinn wafr in wall for back 4, 3 svs...

Do you think there would be noticeable difference if I upgraded to the denon avr 4520 ci with same speaker setup? Any experience w this receiver?

I admit I'm never happy... But seems like the system is bit underpowered. Often I'm running it at 75% max volume and wonder if a beafier higher end receiver would result in noticeable differences? With all the theater receivers out there seems I could have gone much higher end?

Would appreciate someone's advice in terms of possible receiver upgrading.I've had this receiver for about one year. Powering a theater room that's 12 x 25'. 3 pinnacle bd650 speakers for the center and front channel with in wall pinnacles for the other four. Plenty of base with three svs subs...

Logitech link setup using the wifi is working well.

Sorry for the confusion. I currently have the RF sensors in place, etc. using my out of date remote currently. Simply looking for a highly recommended replacement. I guess one example would be the Ultimate Harmony remote or competitor similar or something along those lines. Maybe people are...

Meant RF...not IR.

I apologize since I'm sure this has been addressed at some point, but I could not find recent posting... Can someone give a recommendation on a theater remote with IR to control a theater with the Denon receiver, blue ray in another room obviously with IR capabilities? I'm not opposed to...

Thought I would post an update (anecdotal and from a non-audio expert type) after going with the recommendation of a third BD650 pinnacle for the center channel replacing the BD300. Overall drastic improvement. Fills the room so much better, crisper response with much clearer dialogue...

So I'm guessing that assuming I get my system calibrated, tweaked, etc. optimally, the best option for this room might be to add a vertical positioned pinnacle BD650 as a center replacement vs. any other option out there? Would require some wall cutting in order to recess a bit, but I guess...

First of all, I'm no expert so take my observations for what they are. I have a 25x12 foot theater room. I started with 2 PC12-NSD subs on front stage. Last year I added a third sub to back corner of the room which was their pb 1000. I would say it improved my enjoyment in terms of bass...

Ya. The bd600 series II. For the past year almost, pinnacle had been telling my audio installer it was coming soon...first lat Feb...then spring...then fall... now likley never will be available. Not sure what the heck is going on w/ Pinnacle. Surely some of the installers who view this...

Wow. Didn't realize another bd650 would actually be preferred. So overall, with all the center options for the setup, you guys this another 650 would be most optimal? It is a large speaker, but could be recessed back into the wall I guess. I was told by pinnacle the sound parameters...

Could someone please give me a recommendation on a center channel purchase for a theater room? The room is 25 by 12 feet with 8' ceilings. Currently have 7.1 surround using pinnacle BD650 series II bookshelf speakers for front channel and BD300 for center. In wall speakers for the 2 side...

Wondering if someone could answer a question related to calibration. 7.2 theater setup running off Denon AVR 331CI receiver The front speakers are Pinnacle bookshelves BD650 Series II. Wondering what the optimum crossover frequency would be for these? Or is this a question that cannot be...

I don't have $ to burn, just a bit obsessed I guess. Due to structure issues in the room, the screen changes are not a great option. Only vertical front speaker modifications possible, but no room to change horizontally. I've had equipment 5 months so can't return for credit. I don't think...

The audyssey specs I'm unsure of since its been adjusted manually now. Speakers are crossover set to 80 hz. Levels are also manually set to my ear which is much better than what was set previously with audyssey. I'm pretty sure it's optimized best with the given equipment and speaker placement...

Hoping to get someone's advice on these two issues. First, I am going to upgrade my front channel in-walls (pinnacle WAFR CT 525) which are currently part of a 7.2 surround system using the center WAFR flush 606 rears and center BD 3000 in a 25x15' theater running off a Denon AVR 331 3CI...

Let me check on these details and I will post what I can find. The issue w/ the center was never that I could only hear center, it was just that the center seemed too dominant and the front speakers a little too absent. thx

Do you think this would result a noticeable improvement from the two SVS NSD's? To someone's relatively unsophisticated ears such as mine?