There is only one switch at the side, On and Off. I toggle it many times and nothing happens. I might open the box after contacting Yamaha to see what they say. The connection at the AVR is tight. I remove it and put it back to see how tight it is.
Tonight I noticed my sub woofer is silent. Its Yamaha YST-SW315, 80 watts. The standby green light is off. I don't know if it should be lighted only if there is signal from the Receiver. I checked the power and move it to another outlet. Power is O.K. Checked the connection to the receiver and...
Gene, The bitstream word of yours send me to check the Audio Setup of the BluRay. Yes it suggested to turn the setting to off, but I found out after reading again the Pioneer Receiver Manual that I was using the wrong buttons of the Remote Control. The control has so many buttons which makes...
I recently finished setting up my converted stereo to home theater. I have been renting DVD movies as well as movies in BluRay. I run both of them on my Sony BD player. Are home theater sounds only good in BluRay? I noticed DVD movie sounds, only come in Stereo. No surround or using all 5.1...
I pause and took a picture and it looks like its 2.4:1 aspect. I set my TV to 16x9 before playing then check it while playing and showed Wide. So this movie was shot at Wide aspect ratio. Seems there is nothing I can do? I have read the site you recomended. It seems that is for the old TV and...
Sorry again. Some previews are O.K. like Me and Olson Wells, Batman (the brave and the bold-video game). The cropping ones, Lottery Ticket, Clash of the Titans and Batman (under the red hood).
Robert, The cropping is horizontal, both the top and the bottom is gone. My TV is set to Auto, when I check it I can only take the Auto or the Wide. What it really shows is Wide. I rented a Blu Ray from Redbox called The Losers. I wanted to discover what else I have to learn about HT the...
Is there any reason why my display on TV is cropping? I played Avatar in Blu Ray and it was O.K. Then I tried another Blu Ray movie where the previews were alright but when the real movie starts it starts cropping. I cannot adjust the Aspect from the receiver or from the TV. It displays...
Yes my receiver is the 1019 and my front speakers L/R is Ohm. I checked my 6 in. speaker from years ago if it matches my front and it did. That's how I hear it, so used it for my center. Its brand is Adventure in Sound. Surround are from Pro Accoustic cube speaker called Pure Resonance. It does...
Gene, I adjusted my surround speaker as you and the manual stated. As it went more negative the volume gets softer so I went to the positve side and noticed volume gets louder but it only went as far as +10db or -10db on the negative side. My speakers did not sound loud enough. At this...
Thank you Gene and Steve for your info. Can the surround speaker volume be increased after the MCACC setup? I bought this cube speaker called Pure Resonance from Pro Acoustic. I tried it together with my 6 in. speaker and it did not sound loud with a good volume from my amplifier compared...
I'm new to HT and about to finish my 5.1. Do regular DVD's have surround sound or just Blu Rays? I haven't bought any DVDs. Do they specify anything about the sound that is recorded on it? I have played DVDs from friends, public library's or copied version also from friends. What about from OTA...
Thanks Joe for your info. After connecting my components and doing the MCACC set up, I tried to play my CD and realized the SW isn't working but I already found the solution. I then play my DVD recorder/player but I used a copied DVD. Although my TV is set to Auto for aspect ratio, the picture...
I just finish the MCACC setup. Thanks to Pioneer support. Now my SW is silent when the setup say its OK, and the video aspect is not right. Its wide screen, top and bottom is black. I will do some more reading but maybe someone out there can help me. Receiver is Pioneer VSX 1019AH-K, TV si...
Dave, As I said I started to follow the basic setup and it seems I went one step ahead which is setting the auto MCACC. This MCACC SETUP starts with turning on the TV and the receiver, then connect the microphone to the MCACC jack on the front panel. Once this microphone is inserted it should...
Joe, I have read all the footnotes on page 37 and I am not bi amping my speakers, nor doeing any zone 2 just simple basic setup. I went back on the basic set up which should start with setting the speaker's impedance which I cannot do. When I press enter and press stanby, then "reset no" came...
I just finish buying what I need for my 5.1 HT system and now putting them together. I Have a Philips 52 inch LCD, Pioneer VSX 1019AH-K receiver, a Sony BDP S570 blu-ray and two 6 ft. 24 ga HDMI cable from Monoprice. Now following the receiver manual's component connections then basic setup...
Thanks John, I am now starting to put everything together. I intend to use my Ohm and will put the surround as you suggested since I have no other alternative. I have two good 6 inches speaker which I will try to find out if it matches my front speakers. Can I use both of them if they will...
Robert, Yes. The "NOTES" just throw me out since I have only one Pre Out. I spoke to one of their tech support and told me to just use mono connection, that is from receiver low pass (pre out ) run a mono cable to the MONO INPUT2 (L) of the Sub. LOW PASS and SPLIT SUBWOOFER words kept me...
Robert, The y-adapter has one RCA male to 2 female output, both RCA. Is there a wired output, left and right? So there will be 4 wires coming out instead of 2 female RCA. The yamaha sub needs four wires, two for the left (pos and neg) and two for the right (pos &neg).
Sorry Michael, thought title is my name and Subject is what I am asking. Don't you think subject is better than title? I was debating if its suppose to be connectivity but anway THANKS
I am new to HT and converting my stereo to a 5.1 system. From the beginning I have been concerned about connectivity since there are a lot of components and different manufacturers out there. I have bought a Pioneer 1019AH-K receiver and a Yamaha YST-SW315 powered Subwoofer. Now that I am...
I am now at the middle of my HT conversion from stereo. I already bought a Pioneer BDP1019AH-K reciever, Yamaha YST-SW315 Sub. and using my two tower (42 inch) Ohm (from years ago)speakers for my front. I will audition two center speakers (Polk and --forgot) from Best Buy sometime, to match my...