I still do have the PSW505 sub (was looking to probably get rid of it) but now that you pointed that out I may try them both out to see what happens. Since the Sunfire is so tiny, I may put that right on the platform in the rear and then maybe put the Polk PSW505 where the sunfire is now (about...
The sub is running on LFE (always had it running in that method). Crossover on the receiver is set to 250hz (but really doesnt make any change on that mainly since the sub has a crossover at 100hz or below only). The sub is located about 8ft from the center seat in the first row on the...
So I redid the tests. Did about 3 new tests. I did one with just the mains, one with just the subs, and one again with both on. The first screenshot compares the intial test I did (combined mains and sub) with the 2nd time of it combined. Dramatic difference in smoothing because I made some...
Understandable, I see your point there and you are right below 50 is really where the hard hitting bass notes come in. Right now the sub was already cranked to max on the sunfire (+15db on the dial). I could crank up the EQ on my receiver and try to get that lower end up higher and try the...
So I did a full reading between 10hz and 300hz using the test tones that RealTraps.com has. I set the initial PinkNoise to about 70db. Then proceeded with the test. My sunfire subwoofer only shows information from 10-100hz (above 100hz its out of the picture since thats the highest it can...
Robert_J: I do have the digital RadioShack SPL meter I used when I was trying to get the setup even through the test tone Denon receiver generates. But when you say test tones, Im assuming you mean like a bunch of different ones from like 20hz, 35hz, 50hz, etc all the way to maybe 150hz to find...
So I took this room in my basement (15x25') and turn it into a theater room with 6 seats (2rows of 3 with the back row elevated on 12" platform). Now let me give you the basics of the room so you can understand the layout. Its got a fall ceiling setup (2x2' tiles) This was there when I...
So talked to Elite screens and their control units that control the screen for RF remotes DOES NOT use the Zwave it uses a 433mhz signal, so the Harmony 890 wont work with that one. Dixit
I may be just a moron, but I swear Ive searched for this high and low on many sites and other locations and cant seem to get a clear cut answer to this question. Basically I know the 890 has RF capabilities but the real question is how does it work? From what I can gather it can use the RF to...
MikeNg, I agree with the processing capabilities of onboards are never the greatest but smoetimes I wonder how much is it better, is it something that I can even tell say on a 120" HDTV DLP projection? Having said that, looking at these DVDO, I still have a problem with the whole outboard in...
Paul, thanks for the info on when the new ones are coming out, will have to see what I would be gaining on waiting. Alon, Right now the Parasound is driving a set of Polk RTi12s, CSi5, and FXi5. Sound fairly decent. This "DVDO iScan VP30 or VP50" you talk of, Im not a huge fan of having a...
So I have a Denon AVR3805 now and have already run out of HDTV inputs. It only comes with 3 component inputs and those are all used now and I cannot put anymore sources. It doesnt do HDMI, yet my projector does, however I send Component to the projector since the Denon cant do HDMI. So...